Фазовый состав титановых порошков, полученных для аддитивных машин электродиспергированием отходов сплава ОТ4 в спирте

Cover Page

Cite item

Full Text

Open Access Open Access
Restricted Access Access granted
Restricted Access Subscription Access

Abstract

На основании проведенных экспериментальных исследований, направленных на исследование фазового состава титановых порошков, полученных для аддитивных машин электродиспергированием отходов сплава ОТ4 в пропиловом спирте, отмечено наличие в частицах титанового порошка следующих фаз: α-Ti, TiО и Ti3Al. Проведенные исследования позволят определить наиболее рациональную область применения полученных титановых порошков для производства из них аддитивных изделий.

About the authors

Е. В. Агеев

Юго-Западный государственный университет

Author for correspondence.
Email: ageev_ev@mail.ru
Russian Federation, Курск

А. Е. Агеева

Юго-Западный государственный университет

Email: ageev_ev@mail.ru
Russian Federation, Курск

References

  1. Karlsson J., Snis A., Engqvist H., Lausmaa J. Characterization and comparison of materials produced by Electron Beam Melting (EBM) of two different Ti-6Al-4V powder fractions // Journal of Materials Processing Technology. 2013. V. 213 (12). Р. 2109.
  2. Safdar A., Wei L. Y., Snis A., Lai Z. Evaluation of microstructural developmentin electron beam melted Ti-6Al-4V // Materials Characterization. 2012. V. 65. Р. 8.
  3. Safdar A., He H. Z., Wei L. Y., Snis A. et al. Effect of process parameters settings and thickness on surface roughness of EBM produced Ti-6Al-4V // Rapid Prototyping Journal. 2012. V. 18 (5). P. 401.
  4. Song B., Dong S., Zhang B. et al. Effects of processing parameters on microstructure and mechanical property of selective laser melted Ti6Al4V // Materials & Design. 2012. V. 35. Р. 120.
  5. Song B., Dong S., Coddet P. et al. Fabrication and microstructure characterization of selective laser melted FeAl intermetallic parts // Surface and Coatings Technology. 2012. V. 206. Р. 4704.
  6. Wang Z., Guana K., Gaoa M. The microstructure and mechanical properties of deposited-IN718 by selective laser melting // J. of Alloys and Compounds. 2012. V. 513. Р. 518.
  7. Loeber L., Biamino S., Ackelid U. et al. Comparison of Selective Laser and Electron Beam Melted Titanium Aluminides // Conf. paper of 22nd Int. Symposium “Solid freeform fabrication proceedings”, University of Texas, Austin, 2011. Р. 547.
  8. Biamino S., Penna A., Ackelid U. et al. Electron beam melting of Ti-48Al-2Cr-2Nb alloy: microstructure and mechanical properties investigation // Intermetallics. 2011. V. 19. Р. 776.
  9. Gu D. D., Meiners W., Wissenbach K., Poprawe R. Laser additive manufacturing of metallic components: materials, processes and mechanisms // Int. Materials Reviews. 2012. V. 57 (3). Р. 133.
  10. Konovalov S., Gromov V., Panchenko I. Fatigue-induced evolution of AISi 310S steel microstructure after electron beam treatment // Materials. 2020. V. 13 (20). P. 1.
  11. Geng Y., Konovalo, S. V., Chen X. Research status and application of the high-entropy and traditional alloys fabricated via the laser cladding // Progress in Physics of Metals. 2020. V. 21 (1). P. 26.
  12. Nevskii S., Sarychev V., Konovalov S. et al. Wave instability on the interface coating/substrate material under heterogeneous plasma flows // J. of Materials Research and Technology. 2020. V. 9. (1). P. 539.
  13. Chen X., Liu K., Guo W. et al. The fabrication of NiTi shape memory alloy by selective laser melting: a review // Rapid Prototyping J. 2019. V. 25 (8). P. 1421.
  14. Konovalov S., Osintsev K., Golubeva A. et al. Surface modification of Ti-based alloy by selective laser melting of Ni-based superalloy powder // J. of Materials Research and Technology. 2020. V. 9 (4). P. 8796.
  15. Ageev E. V., Ageeva E. V. Properties of the Coat-ings Fabricated by Plasma-Jet Hard-Facing by Dispersed Mechanical Engineering Wastes // Russian Metallurgy (Metally). 2018. V. 2018 (6). P. 573.
  16. Latypov R. A., Ageev E. V., Altukhov A. Y., Ageeva E. V. Manufacture of cobalt–chromium powders by the electric discharge dispersion of wastes and their investigation // Russian metallurgy (Metally). 2018. V. 2018 (12). Р. 1177.
  17. Ageev E. V., Latypov R. A. Fabrication and investigation of carbide billets from powders prepared by electroerosive dispersion of tungsten-containing wastes // Russian J. of Non-Ferrous Metals. 2014. V. 55 (6). Р. 577.

Supplementary files

Supplementary Files
Action
1. JATS XML
Download

Copyright (c) 2024 Russian Academy of Sciences