The influence of the fluoride process of tungsten deposition parameters on the properties of tungsten self-composites obtained by chemical vapor infiltration
- 作者: Bukatin T.N.1, Karpenkov D.Y.1, Dushik V.V.2, Ten D.V.1
-
隶属关系:
- The National University of Science and Technology MISIS
- Frumkin Institute of Physical Chemistry and Electrochemistry of the Russian Academy of Sciences
- 期: 卷 88, 编号 5 (2024)
- 页面: 760-766
- 栏目: Physics of ferroelectrics
- URL: https://edgccjournal.org/0367-6765/article/view/654682
- DOI: https://doi.org/10.31857/S0367676524050112
- EDN: https://elibrary.ru/OWWIZF
- ID: 654682
如何引用文章
详细
The influence of the parameters of the chemical vapor infiltration process of tungsten powder on the depth of its impregnation, mechanical properties and density of the obtained blanks is studied. It was found that the depth of infiltration depends on the rate of chemical vapor deposition of tungsten, and the maximum bend strength is achieved the sample, obtained at temperature of 450 °C and a gas pressure of 133 mbar. The method of chemical vapor infiltration is promising for the development of technology of additive manufacture of the items made of tungsten and composites based on it.
作者简介
T. Bukatin
The National University of Science and Technology MISIS
编辑信件的主要联系方式.
Email: bukatin.t@gmail.com
俄罗斯联邦, Moscow, 119049
D. Karpenkov
The National University of Science and Technology MISIS
Email: bukatin.t@gmail.com
俄罗斯联邦, Moscow, 119049
V. Dushik
Frumkin Institute of Physical Chemistry and Electrochemistry of the Russian Academy of Sciences
Email: bukatin.t@gmail.com
俄罗斯联邦, Moscow, 119071
D. Ten
The National University of Science and Technology MISIS
Email: bukatin.t@gmail.com
俄罗斯联邦, Moscow, 119049
参考
- Zohm H. // Fusion Eng. Des. 2013. V. 88. No. 6—8. P. 428.
- https://pubchem.ncbi.nlm.nih.gov/compound/Tungsten.
- Kim H., Lee H.J., Kim S.H., Jang C. // Fusion Eng. Des. A. 2016. V. 109—111. P. 590.
- Gallardo J.A.G., Giménez M.A.N., Gervasoni J.L. // Ann. Nucl. Energy. 2020. V. 147. Art. No. 107739.
- Xie J., Lu H., Lu J. et al. // Surf. Coat. Technol. 2021. V. 409. Art. No. 126884.
- Pitts R.A., Bonnin X., Escourbiac F. et al. // Nucl. Mater. Energy. 2019. V. 20. Art. No. 100696.
- Хорьков К.С., Абрамов В.Д., Кочуев Д.А. и др. // Изв. РАН. Сер. физ. 2017. Т. 81. № 12. С. 1619; Khorkov K.S., Abramov V.D., Kochuev D.A. et al. // Bull. Russ. Acad. Sci. Phys. 2017. V. 81. No. 12. P. 1429.
- Bachmann C., Arbeiter F., Boccaccini L.V. et al. // Fusion Eng. Des. 2016. V. 112. P. 527.
- Harutyunyan Z., Ogorodnikova O., Gasparyan Y. et al. // J. Nucl. Mater. 2022. V. 567. No. 153811.
- Marinelli G., Martina F., Lewtas H. et al. // J. Nucl. Mater. 2019. V. 522. P. 45.
- Крат С.А., Фефелова Е.А., Пришвицын А.С. и др. // Изв. РАН Сер. физ. 2022. Т. 86. № 5. С. 627; Krat S.A., Fefelova E.A., Prishvitsyn A.S. et al. // Bull. Russ. Acad. Sci. Phys. 2022. V. 86. P. 521.
- Jasper B., Coenen J.W., Riesch J. et al. // Mater. Sci. Forum. 2015. V. 825. P. 125.
- Dong Z., Ma Z., Yu L. et al. // Nature Commun. 2021. V. 12. P. 5052.
- Rieth M., Dudarev S.L., De Vicente S.G. et al. // J. Nucl. Mater. 2013. V. 432. No. 1—3. P. 482.
- Puma G.L., Bono A., Krishnaiah D., Collin J.G. // J. Hazard. Mater. 2008. V. 157. No. 2—3. P. 209.
- Fotovvati B., Namdari N., Dehghanghadikolaei A. // J. Manuf. Mater. Process. 2019. V. 3. No. 1. P. 28.
- Tamura S., Tokunaga K., Yoshida N. // J. Nucl. Mater. 2002. V. 307. P. 735.
- Song J., Yu Y., Zhuang Z. et al. // J. Nucl. Mater. 2013. V. 442(1—3). P. S208.
- Murphy J.D., Giannattasio A., Yao Z. et al. // J. Nucl. Mater. 2009. V. 386. P. 583.
- Angelescu D. E., Schroeder R. J. Технология изготовления металлических устройств со встроенными оптическими элементами, оптическими устройствами или оптическими и электрическими вводами. Патент США № 20100041155A1. 2008.
- Raumann L., Coenen J.W., Riesch J. et al. // Surf. Coat. Technol. 2020. V. 381. Art. No. 124745.
补充文件
